Ventilation Restaurant Hall 33 seats

To ensure the necessary fresh air in the room and to provide the necessary air exchange, a suction and exhaust ventilation system is designed. The calculations are based on the number of people staying. The suction ventilation system EV-1 serves to suck and expel the contaminated air from the room. The air is sucked in by ventilation grilles type SPN 1 Galva 600/200.

In order to compensate the exhausted air, as well as to provide fresh air, the EV-1 exhaust ventilation installation is provided. Fresh air is taken from the rear facade of the building. The two ventilation installations are intended to operate simultaneously, and this is done by means of a ventilation recuperative block with a pre-ignition and a subsequent electric calorifier included for winter operating mode. Fans providing the necessary head supply and suck the air through a ductwork to the ventilation grilles. The air supply is provided by four ventilation grilles type SPN 1 Galva 600/200 mounted directly on the spiral duct.

Play area 6 seats

To ensure the necessary fresh air in the room and to provide the necessary air exchange, a suction and exhaust ventilation system is designed. The calculations are based on the number of people staying. The suction ventilation system EV-2 serves to suck and expel the contaminated air from the room. Air suction is through two ventilation grilles type SPN 1 Galva 400/75.

In order to compensate the exhausted air as well as to provide fresh air there is provided an exhaust ventilation installation SV-2. Fresh air is taken from the rear facade of the building. The two ventilation installations are intended to operate simultaneously, and this is done by means of a ventilation recuperative block with a pre-ignition and a subsequent electric calorifier included for winter operating mode. Fans providing the necessary head supply and suck the air through a ductwork to the ventilation grilles. The air supply is via two ventilation grilles type SPN 1 Galva 400/75 mounted directly on the spiral duct.

Smoking area 5 places

To ensure the necessary fresh air in the room and to provide the necessary air exchange, a suction and exhaust ventilation system is designed. The calculations are based on the number of people staying. The suction ventilation system CB-3 serves to suck and expel the contaminated air from the room. Air suction is through two ventilation grilles type SPN 1 Galva 400/75.

In order to compensate the exhausted air, as well as to provide fresh air, an exhaust ventilation installation HB-3 is provided. Fresh air is taken from the rear facade of the building. The two ventilation installations are intended to operate simultaneously, and this is done by means of a ventilation recuperative block with a pre-ignition and a subsequent electric calorifier included for winter operating mode. Fans providing the necessary head supply and suck the air through a ductwork to the ventilation grilles. The air supply is via two ventilation grilles type SPN 1 Galva 400/75 mounted directly on the spiral duct.

Ventilation WC visitors

Exhaust suction ventilation is provided from the sanitary premises by axial fans with self-closing valve mounted on PVC pipes. Fan start and control is a serial key parallel to the one for the lighting. The contaminated air is thrown over the roof of the building. The air will be compensated by adjoining rooms.

Ventilation Office

Exhaust suction ventilation for the premises of the Office is provided, through a recuperative ventilation unit of type "Eco freshness", mounted on a PVC pipe. The start and control is by remote control. The contaminated air is thrown into the rear facade of the building.

Ventilation Warehouse

Exhaust suction ventilation is provided by Warehouse through a axial fan mounted on the rear facade. Fan start and control is a serial key parallel to the one for the lighting. The contaminated air is thrown over the roof of the building. The air will be compensated by adjoining rooms.

Air conditioning

Room air temperature will be maintained throughout the season according to the season. For the air-conditioning of the premises of the building - where the investor required - there are installed air-conditioning split systems operating on direct evaporation. The indoor units are for high-wall installation. Condensate is drained on PVC pipes with thermal insulation and joined to vertical sewer branches through an S-shaped siphon to prevent the spread of odors. Each body has a separate remote control which provides the possibility of individual adjustment of the operating mode.